LogiCad 3 3 hours

More
2 years 8 months ago - 2 years 8 months ago #216 by Yrij
LogiCad 3 3 hours was created by Yrij
Hello.
Sorry for my bad English.
I have a question.
Do I understand correctly logi.CAD 3 Compact, has a limit on the loaded
Programs for CONTROLLINO or Arduino nano, only for 3 hours.
If this is so then it is a pity, a good program, but it is practically impossible to apply the Compact, for reference only.
Last edit: 2 years 8 months ago by Yrij.

Please Log in or Create an account to join the conversation.

More
2 years 8 months ago #217 by Jürgen Huber
Replied by Jürgen Huber on topic LogiCad 3 3 hours
Hello Yrij,

many thanks for your post.
Yes, Arduino nano and Controllino is at the moment restricted for 3 hours.
After the 3 hours you have to restart your hardware.
Can you give us some more information about your project?
If it is required to have a unrestricted version get in contact with me under This email address is being protected from spambots. You need JavaScript enabled to view it. !

regards,
Jürgen

Please Log in or Create an account to join the conversation.

More
2 years 8 months ago #219 by Yrij
Replied by Yrij on topic LogiCad 3 3 hours
Hello
Jürgen Huber
Thanks for the quick response.
I have sent a letter to you at the address. "This email address is being protected from spambots. You need JavaScript enabled to view it."

Best regards.
Yrij.

Please Log in or Create an account to join the conversation.

More
2 years 8 months ago - 2 years 8 months ago #220 by Yrij
Replied by Yrij on topic LogiCad 3 3 hours
Hello
Jürgen

My impression is good and interesting program.
One note
I have carefully studied the portfolio logi.cad compact.

“COMPACT, PROFESSIONAL & ENTERPRISE+
logi.CAD 3 is available in three different versions and can optimally be adapted to different require-ments. logi.CAD 3 “Compact” is available for free and offers a powerful ST-Editor (Structured Test). logi.CAD 3 “Professional” allows graphical programming in FBD (function-block-diagram) and FSC (function sequential chart), and supports the teamwork of developers. logi.CAD 3 “Enterprise” is the basis for company specific solutions.”

And I do not see a message that the application for CONTROLLINO Arduino Nano
3:00 hours, after loading.
I think it will be correct to point out this fact.

This I found only in the manual logiCAD3_V1.89.0_EN.pdf
To not search for the reason after installing logi.CAD 3 COMPACT.

Maybe I'm wrong.


Best regards.
Yrij.
Last edit: 2 years 8 months ago by Yrij.

Please Log in or Create an account to join the conversation.

More
2 years 8 months ago #221 by Jürgen Huber
Replied by Jürgen Huber on topic LogiCad 3 3 hours
Hi Yrij,

many thanks for your answer.
Yes you are right. At the moment there is only the information in the online help. => help.logicals.com/display/LC3UserDocuEN/...lino+or+Arduino+Nano
But I will forward your idea internally for a message that the program will run only for 3 hours when uploading the program.

Regards,
Jürgen

Please Log in or Create an account to join the conversation.

LOGI.CALS AUSTRIA

Address

Europaplatz 7/1,
3100 St. Pölten

LOGI.CALS GERMANY

Address

Postfach 1306,
40738 Langenfeld
© 1987 - 2019 logi.cals GmbH